I have previously here on my blog mentioned my preference for HP calculators. Our first calculator at home was the HP-21, with a red LED display, which we got in late 1975 (if I remember correctly), soon after it was released. My parents used it for all different kinds of calculations, especially taxes (back then the Swedish tax system was much more complicated than it is today). My cousin who worked at HP (and got us the calculator) explained RPN (Reverse Polish Notation) to me, and it made sense to me to use that system for calculations.
Fast forward to 1983. I was now in 8th grade and we were allowed to use calculators in school. In 7th grade I had learned to use a slide rule (it was already outdated at this time) just to irritate my math teacher, but now I got my very own calculator, the HP-15C. This scientific calculator, often called the best calculator ever made, was programmable with 448 program steps. I wrote all kinds of programs for it, and used it heavily in math and physics classes in school.
In 1987, HP released the graphing calculator HP-28C, with 2kB of memory, a display that could show not only graphs but all four levels of the stack, and a flip-open or “clamshell” case, with two separate keyboard sections. I got one as soon as it came out, as well as an infrared thermo printer (HP82240A). My dad took over my HP-15C, and he kept it until his death in 2001.
A year later HP-28S was released, with 32kB memory and support for directories and custom menus, as well as a few new fucntions like symbolic expressions. So I sold the HP-28C and purchased the newer model, even if I was almost done with high school at this point.
In 1990 HP released the great HP-48SX, with a large graphics display, two expansion ports for memory cards of up to 128kB, a two-way infrared port, a serial port with support for the Kermit file transfer protocol and 32kB build-in user memory. The processor had a clock frequency of 2 MHz and the display had a resolution of 131 x 64 pixel. I got this calculator in April 1990, while I served in the Swedish Air Force. I really had no use for the calculator right then, but I knew that I wanted the latest and greatest in HP handheld calculators. I don’t remember what I did with my HP-28S, I think I may have sold it to an old classmate. I kept the printer, despite the fact that a newer model (HP82240B) had been released. The few changes did not motivate me to spend that extra money.
I have kept my old trusty HP-48SX ever since, for 24 years now. It still works, and in the last 20 years I probably only had to replace the batteries a couple of times.
A few weeks ago I happened to search for HP-28S on eBay, and found that there were several of them for sale there. There were also several HP-28C and HP-48SX, as well as it’s successor HP-48GX (which I never owned). I managed to buy an HP-28S, manuals for it and a leather case just like the one I had. I also picked up a HP82240B printer for $30, I could not resist it at that price…
So now I have all the HP calculators I once owned, except the HP-28C. I also plan to purchase another HP-48SX, as my original calculator have a problem. In order to turn it on or off, I have to press lightly in a specic spot on the case. This well known and common issue is due to a shrunken/dried contact pad between the display and the main curcuit board.
I also purchased a non-working HP-48SX just a few days ago for $22, just so I can open it and see what it looks like inside, before I attempt to repair my own original calculator. Of course I hope that the eBay seller never tried the trick to press in that particular spot, so it may just have the same issue as my calculator. We will see when I get it.
Below is my little collection of HP calculators and printers. In the top row you can see the HP82240B printer to the left and the HP82240A in it’s leather case in the center. To the far right is the leather case for HP-28S.
Love my HP-48-GX. Still use it and the Android application mimicking it beautifully.
I bought my HP15C in July 1983 for 1st year Engineer. I still use it everyday at work (mostly for simple math nowadays). Remarkably, it works great, and I’ve only replaced the batteries maybe 3 times in 33 years.
Pingback: TexasSwede | Looking for a HP calculator? Look no further!
Somehow I just discovered your blog today, 20200407, while obeying our governor’s order to shelter at home due to Covid 19. I am a bit older than you and have managed to use and accumulate more HP calculators: First was the HP15C (working as an R and D engineer at AT&T) ,then an HP 41CV for use of the HP-IL printer etc., then an HP 12 C for business school, then an HP 28S to feed my habit, and then finally the HP48GX because I knew it would be the last word in solidly built RPN -only calculators.
But it was only last month that I was able to purchase the one HP I had wanted since 1976: The HP25. I could not afford one as an undergrad yet wold see it often in the bookstore. Meanwhile I was content, living with a TI SR50.
It’s amazing how loyal so many of us are to the HP calculator family.
After reading your review of the SwissMicros I purchased (just now on Amazon) their DM16L. I never had an HP 16C because I never had a use for that much binary stuff but now I am programming PIC 8 bit micro controllers, and the base conversions alone can justify the price – plus it is almost an HP.
I wish you health through this most unusual pandemic situation and feel free to drop me a line if you want any pictures of my HP collection.
Sincerely
Dave Levitan, Crystal Lake Illinois
The HP-21 my parents had was almost identical to the HP-25, except that it was not programmable.
We got it from my cousin, who had just started working for HP at that time. He initially worked in support, and repaired broken calculators. He told me a story about a university student that sent in his HP-25 for repair. The keyboard had been modified to look like a HP-21, since that model was allowed on tests but not the programmable HP-25… I am trying to remember if he told me they replaced the keyboard with a brand new HP-25 keyboard or if they put a brand new HP-21 keyboard layout on it… Knowing my cousin (and several of his colleagues from that time), I would not have been surprised if it was the latter. :-)
I am glad you found my blog and that you were able to get the DM16L. I use my DL15L all the time, it is a solid piece of engineering.